Technical Info about our Chemicals |
|---|
|
Click on the product name to go to that tech section: ZEP 2000, An Aerosol Heavy-Duty, Clear Grease. ZEPRESERVE, An Aerosol Penetrant. ZEPRIDE, A Fast-Acting Cleaner and Degreaser. COLD GALVANIZE COATING, An Aerosol Cold Galvanizing treatment. ZEPROTREAT, A Gasoline Fuel Tank Additive. DRY GRAPHITE, An Aerosol Dry-Film Graphite Lubricant. ML LUBRICANT, An Aerosol Molybdenum-Based Lubricant. ZEP DRY MOLY NC,™ An Aerosol Dry Film Lubricant. PROFESSIONAL RUBBERIZED COATING™ An Aerosol Protective Undercoating. RUSTARRESTER™ A Rust Conversion Coating. ZEP-PAR™, An Aerosol Silicone Spray Lubricant and Paintable Release Agent. ZEPLON™, A Long-Lasting, Aerosol Dry-Film Teflon Lubricant. BATTERY COAT™, An Aerosol Battery Terminal Protector and Sealer. ZEPRESTO, A Two-Phase Super Heavy Duty small parts stripper. DIESEL FUEL ADDITIVE™, A concentrated Diesel Fuel Additive. ZEP 2000™Heavy-Duty, Clear, Penetrating GreaseDESCRIPTIONAn aerosol, high pressure, clear lubricant with high adhesive strength. A unique combination of natural and synthetic lubrication agents. This product contains PTFE. FEATURES: BENEFITS • Penetrating grease: Solvents promote maximum penetration, even into tight areas, and evaporates rapidly allowing set up of the grease. • High adhesive strength: Adheres to surfaces, resists throw-off and squeeze out when subjected to extreme pressure, vibrations, or repeated impact. Provides long-lasting lubrication. • Wide temperature range: Lubricating film remains effective at temperatures ranging from -103°F to 600° F. • Inhibits corrosion: Coated metal parts resist water wash out, helping to prevent rust and corrosion. • Resists water washout: Can be used effectively in wet environments. • Contains PTFE: PTFE enhances lubrication performance and reduces friction. APPLICATIONS Use to lubricate a variety of surfaces including door hinges, open gears, wire ropes and cables, chains and sprockets, conveyors and manifold heat valves, above water line marine application. SPECIFICATIONS Physical Form . . . . . . . . . . . . . . . . ..Aerosol Storage Temperature ........................0° F to 120° F Propellant . . . . . . . . . . . . . . . . . . .. .Hydrocarbon Shelf Life..........................................1 year minimum Flammability ....................................Extremely Flammable Net Weight . . . . . . . . . . . . . . . . . . ..18 oz. D.O.T. Shipping Label ......................ORM-D PACKAGING 18 oz Aerosol Can PROD. #4164 Click here to return to top of page ZEPRESERVE™An Aerosol Penetrant that Lubricates and Displaces Moisture.DESCRIPTIONAn aerosol penetrant, light-duty lubricant, moisture displacer, and short-term corrosion preventer. A blend of solvents, mineral and silicone oils, wetting and penetrating agents, drying agents and protectants. FEATURES: BENEFITS • Convenient: Aerosol packaging allows use on small parts and for spot applications. Eliminates waste from drippage or spills. • Penetrates: Quickly penetrates rust and corrosion. Loosens rust, frozen nuts, bolts and screws as well as other rust frozen parts. • Lubricates: Provides lubrication for ease of removal. Excellent light-duty lubrication of sliding or turning parts. • Displaces moisture: Penetrates and displaces moisture, condensation, etc. Dries electrical components such as ignitions, etc. • Prevents corrosion: Provides short-term corrosion prevention to both ferrous and non-ferrous metals. Seals out corrosive elements. • Cleans: Removes grease, tar, lint, dust and graphite. Frees parts from impacted soil, rust and corrosion. • Non-flammable: Not flammable by CSMA flame extension test. SPECIFICATIONS Physical Form . . . . . . . . . . . . . . . . . . . . . . .Aerosol Shelf LIfe....................................................1 year minimum Propellant Type . . . . . . . . . . . . . . . . . . . . . .CO 2 DOT Shipping Label.....................................None Container Size . . . . . . . . . . . . . . . . . . . . . . 24 fl. oz. Storage Temperature...................................0° - 130°F (-18° to 54°C) Net Weight . . . . . . . . . . . . . . . . . . . . . . . . 1 lb. 6 oz. (625 g) Flammability ..............................................Not Flammable PACKAGING 24 fl. oz. aerosol can PROD.#0095 Click here to return to top of page ZEPRIDE™A Fast-Acting Cleaner and DegreaserDESCRIPTIONA multi-purpose, water-based combination of alkaline builders, synthetic detergents, and “butyl” solvent. FEATURES: BENEFITS • Powerful cleaning action: Rapidly cleans a wide variety of surfaces. At recommended dilutions, can be used on almost any surface not affected by water alone. • “Butylated”: Contains a water-soluble butyl solvent that makes the product a powerful degreaser. • Hard water tolerant: Low-foaming formula rinses freely, and leaves no residues. • Versatile: May be used by hand or with steam and pressure cleaning equipment. • Non-corrosive: Will not harm metal surfaces, including aluminum, when used as directed on label. Note: May bleach, streak, or run paint. Test before using. APPLICATIONS Used to clean and degrease many surfaces including glass, chrome, steel, vinyl, plastic, etc. May be used as a bilge cleaner, printing ink remover, wax stripper, white sidewall cleaner, steam cleaner, etc. See label for specific instructions and cautions. SPECIFICATIONS Physical Form . . . . . . . . . . . . . . . . . . . . . .Thin, water-based liquid Shelf Life ..................................................1 year minimum Color . . . . . . . . . . . . . . . . . . . . . . . . . . . .Clear, dark blue Density/Specific Gravity...............................8.50 lbs./gal - 1.02 Odor . . . . . . . . . . . . . . . . . . . . . . . . . . . ..Mild “butyl” D.O.T. Shipping ........................................None pH (Concentrate) . . . . . . . . . . . . . . . . . . .12.7 to 13.0 (At dilution of 1 oz/gallon) . . . . . . . ....... .11.1 to 11.5 Flash Point (TCC) ....................................None PACKAGING: Gallons, Pails, Drums PROD. #0567 Click here to return to top of page COLD GALVANIZE COATING™A Heavy-Duty, Industrial Grade Cold Galvanize AerosolFEATURES: BENEFITS• Heavy-duty: Resistant to salt, rust, corrosion and water. Ninety-five percent pure zinc. • Easy-to-use: Convenient method for applying heavy-duty galvanizing protection for iron, steel and aluminum. • Environmentally friendly: Contains no CFC’s or other ozone depleting compounds. DESCRIPTION Zep Cold Galvanize is an aerosol spray designed as a zinc primer and a two-way protective barrier against rust and corrosion that effectively seals out both air and moisture. Zep Cold Galvanize is an excellent primer, rust and corrosion protector for steel, iron and other metals. Excellent for use in shipyards, and other areas where corrosion prevention is needed. SPECIFICATIONS Physical Form . . . . . . . . . . . . . . . . . . . . ..Aerosol Storage Temperature ................................50° to 100° F(10° to 45°C) Primary Ingredient . . . . . . . . . . . . . . . . . .Zinc Shelf Life ................................................1 year minimum Container Size . . . . . . . . . . . . . . . . . . . ..16 fl. oz. Flammability............................................Extremely flammable Net Weight . . . . . . . . . . . . . . . . . . . . . ..14 oz. (396g) D.O.T. Shipping Label . . . . . . . . . . . . . . .None Meets or exceeds the following specifications: MIL-P-26915A for steel USAF MIL-T-26433 for towers USAF MIL-P-46105 weld through primer MIL-P-21035 galvanize repair USN PACKAGING 16 fl. oz. aerosol can PROD. #0190 Click here to return to top of page ZEPROTREATGasoline Fuel Tank AdditiveBENEFITS:Helps maintain engine performance, fuel economy, and uniform combustion. Removes any traces of gum, varnish and shellac. Protects against fuel system corrosion. Will not harm catalytic converters or oxygen sensors. Contains corrosion inhibitors to protect fuel system. Effective in both fuel-injected and carbureted cars. EPA registered as a fuel additive. CAUTION: Do not use in diesel engines. PROPERTIES Appearance .........................Dark colored Flash point ..........................172°F Form................................... Liquid Scent ...................................Solvent-like PACKAGING 12 fl. oz. plastic bottle PROD. # 0357 Click here to return to top of page DRY GRAPHITEDry-Film Graphite LubricantDESCRIPTIONA fast-drying dry-film graphite lubricant which forms a conductive coating and lubricates up to 1000°F. FEATURES BENEFITS • Excellent extreme-temperature lubrication: provides excellent lubrication up to 1000°F (538°C). • Superior adhesion: Thermoplastic resins promote adhesion to all metals and most plastics. • Environment friendly: Advanced formula contains no ozone-depleting compounds. • Fast-drying film: Does not attract dust or other airborne particulates. • Versatility: Also effective as an anti-seize compound and release agent. • Electrical conductivity: Can be used to lubricate contact points where electrical conductivity must be maintained. APPLICATIONS Use for engine assembly and break-in, hydraulic pumps, conveyor systems, automotive and industrial gaskets, tumbler locks, oven, furnace, and kiln mechanisms, any application where an extreme temperature dry-film lubricant is required. SPECIFICATIONS Physical Form . . . . . . . . . . . . . ... .Aerosol DOT Shipping Label.......................None Propellant . . . . . . . . . . . . . . . . . . Hydrocarbon Shelf Life ....................................1 year minimum Can Size . . . . . . . . . . . . . . . . . .. .24 fl. oz. Flammability .................................Not Flammable Net Weight . . . . . . . . . . . . . . . . ..1 lb.2 oz.(510 g) Shelf Life . . . . . . . . . . . . . . . . . . .1 year minimum Storage Temperature.....................0°F(-18°C) to 120°F (49°C) PACKAGING 20 fl. oz. aerosol can PROD. #0164 Click here to return to top of page ML LUBRICANT™Heavy-Duty, Molybdenum-Based Lubricant in a Convenient AerosolDESCRIPTIONA blend of penetrating solvents, heavy lubricants, molybdenum disulfide, and corrosion inhibitors in a convenient aerosol. FEATURES BENEFITS • Heavy-duty lubrication: Positively reduces friction under slow, heavy loads. • Reduces wear: Eliminates metal-to-metal contact on heavy equipment parts. • Penetrates: Sprays on as a thin, quick-breaking liquid foam that penetrates into cracks and crevices, then cures to a heavy, long-lasting lubricant film. • Waterproof : Won’t wash off with water. • Temperature resistant: Remains effective at normal operating temperatures; will not melt, chip, or peel. No ODC’s: Contains no 1,1,1 CFC’s, or other ozone depleting substances. APPLICATIONS An excellent lubricant for open gears, chain drives, conveyors, cams, mining equipment, cranes, draglines, dredges, bull and ring gears, automotive parts, construction equipment, material handling equipment, etc. SPECIFICATIONS Physical Form . . . . . . . . . . . . . . . .Aerosol Storage Temperature.....................0° to 120°F (-18° to 49°C) Propellant . . . . . . . . . . . . . . . . . . .Hydrocarbon Flammability ..................................Flammable Net Weight . . . . . . . . . . . . . . . . . .16 oz. avdp. (454 g) Shelf Life .......................................1 year minimum D.O.T. Shipping Label . . . . . . . . . .None PACKAGING 20 fl. oz. Aerosol Can PROD. #7313 Click here to return to top of page ZEP DRY MOLY NC™An Aerosol Dry Film LubricantDESCRIPTIONDry film lubricant that provides superior, long-lasting lubrication under extreme conditions of temperature and pressure. Dries within seconds. (Contains moly disulfide in a non-oily base.) FEATURES: BENEFITS • Micronized MoS2: Effective lubrication at temps to 750°F and pressure loads to 100,000 psi. • Dries rapidly: Non-tacky finish adheres well to all metals, most plastics, glass and rubber. • Replaces graphite: Stops galling and seizing of metals, prevents chattering. • Moisture protection: Protects from rust . Withstands water, oils, alkalies and most acids. • Contains no grease or oil: Lubricates in areas where gummy lubes cannot beused. • Preserves: Extends life of bearings, cams, gears and other machine parts. • Provides lifetime lubrication: Areas inaccessible after assembly remain lubricated. CAUTION: Spray is extremely flammable. Do not apply in presence of any sources of ignition. APPLICATIONS For lubricating moving parts subjected to high temperatures and very heavy loads. For speeding press fit assemblies. Allows non-destructive disassembly. SPECIFICATIONS Active Ingredient ..............................Micronized Molybdenum Disulfide Propellant Type . . . . . . . . . . . . . . ....Hydrocarbon Particle Size .....................................90% < 1 Micron Container Size . . . . . . . . . . . . . . .....20 fl. oz. Flammability.....................................Extremely Flammable Color . . . . . . . . . . . . . . . . . . . . . ....Dark Gray Effective Temp. Range (film) .............Up to 750°F Effective Press.Range (film)................Up to 1000,000 psi PACKAGING: 20 fl. oz. aerosol can PROD. #0106 Click here to return to top of page PROFESSIONAL RUBBERIZED COATING™Protective Undercoating and Sound DeadenerFEATURES: BENEFITS• Prevents rust: Provides protective barrier against rust-causing elements such as water and salts. • Muffles noise: Produces a heavy-bodied, flexible film which helps muffle unwanted noise. • Dries quickly: Easy-to-use formula will not drip, run or sag. • Convenient: Aerosol packaging is easy to use and provides convenient means of keeping up with per job costs. • No asbestos: Formulated without asbestos for greater safety. • Paintable: Zep Professional Rubberized Coating provides a flexible finish which can be painted. DESCRIPTION Premium quality, aerosol rubberized coating which provides outdoor protection for a variety of surfaces, and insulates against unwanted noise. SPECIFICATIONS Physical Form . . . . . . . . . . . . .....................Aerosol Shelf Life ...................................................1 year minimum Propellant Type . . . . . . . . . . . ....................Hydrocarbon D.O.T. Shipping...........................................None Container Size . . . . . . . . . . . . ....................24 fl. oz. Storage Temperature ..................................0° to 120°F Net Weight . . . . . . . . . . . . . .....................20 oz. Avdp (567 g) Flammability ...............................................Extremely Flammable 24 fl. oz. aerosol can Prod #0289 Click here to return to top of page RUSTARRESTER™Rust Conversion CoatingFEATURES: BENEFITS• Easy to use : Remove loose rust, then brush, roll, or spray on rusted surfaces. • One step: Eliminates acidizing, sandblasting, grinding, and scraping. • Stops rust: Chemically converts existing rust into a black protective coating. • Permanant: Polymeric formula forms an oxidation-resistant coating. • Excellent primer: May be painted over without further surface preparation. • Non-flammable: Water-based emulsion makes the product non-flammable. DESCRIPTION A water-based, latex resin emulsion which is formulated to convert rust to a stable iron complex, thus stopping the rusting process. APPLICATIONS Use on pipes; valves and fittings; in refineries, tankers, powerplants, trailers, storage tanks, fences, guard rails, bulkheads, decks, hatch covers, agricultural equipment, snow removal equipment, and automobile repair shops. SPECIFICATIONS Physical Form . . . . . . . . . . . . ..........Slightly thick, water emulsion liquid Density/Specific Gravity ............9.5 lbs./gal. - 1.140 Color. . . . . . . . . . . . . . . . . .............Opaque, off-white Flash Point (TCC)..............................None Odor . . . . . . . . . . . . . . . . . . ...... . ..Latex resin Shelf Life.................................1 year minimum pH . . . . . . . . . . . . . . . . . .2.0 - 2.5 D.O.T. Shipping Label ......................None PACKAGING: Gallons PROD. #1468 Click here to return to top of page ZEP-PAR™Silicone Spray Lubricant and Paintable Release AgentDESCRIPTIONZep-Par is a concentrated aerosol silicone lubricant. Reduces sticking and squeaking. FEATURES: BENEFITS • Paintable: Will not interfere with any subsequent painting or metalizing operations as ordinary silicones do. • Fast drying: Solvent carriers evaporate rapidly and completely, leaving no visible film. • Stainless: Dried film of Zep-Par is colorless and will not stain surfaces. • Non-stick: Residual film prevents welding spatter from sticking • No petroleum solvents: Non-flammable formulation. • Contains no ODC’s: Formulated without 1,1,1 or other ozone depleting compounds. Caution: This products contains solvents which may be harmful to certain plastics or paints. Pre-test in an inconspicuous area. APPLICATIONS Use as a mold release agent for injection, transfer and compression molding. Lubricant for cutting tables, sewing machines, needles, zippers and hand irons. Renews rubber and vinyl trim, lubricates locks, hinges and window channels. SPECIFICATIONS Physical Form . . . . . . . . . . . . . . . . . . . Aerosol Shelf LIfe ............................................1 year minimum Propellant Type . . . . . . . . . . . . . . . . . .Carbon Dioxide DOT Shipping Label..............................None Container Size . . . . . . . . . . . . . . . . . . .24 fl. oz. Storage Temperature............................0° - 120°F Net Weight . . . . . . . . . . . . . . . . . . . . .16 oz. (454 g) Flammability .......................................Not Flammable PACKAGING: 24 fl. oz. aerosol can PROD. #0191 Click here to return to top of page ZEPLON™A long-Lasting aerosol Dry-Film Teflon LubricantDESCRIPTIONZeplon is a long-lasting PTFE dry-film lubricant. FEATURES: BENEFITS • Reduces friction: Zeplon leaves a stable film of micron-size particles which act as tiny “ball-bearings”. • Dry film: Lubricating film is non-tacky and does not attract dust or dirt. • Non-staining & oderless: Contains no oils or greases to cause staining or odor. • Non-reactive: Residual film does not react to acids, alkalis, oils, solvents or water. • Cumulative: Penetrates the surface and becomes more effective with each added application. • Heat stable: Zeplon’s dry film works from -40°F to 450°F. • Environmentally Friendly: Contains no ozone depleting compounds. APPLICATIONS Zeplon Lubricates: Locks, hinges, file drawers, latches, pulleys, chains and most moving parts. Eliminates material drag when cutting or sewing cloth, rubber foam or leatherette fabrics. CAUTION: Spray is extremely flammable. Do not apply in presence of sources of ignition. SPECIFICATIONS Physical Form . . . . . . . . . . . . . . . . .Aerosol Storage Temperature . . . . . . . . . . . . . .0°- 120°F Propellant . . . . . . . . . . . . . . . . . . Hydrocarbon Flammability . . . . . . . . . . . . . . . . . Extremely Flammable Net Weight . . . . . . . . . . . . . . . . . . 13 oz.(368g) Shelf Life . . . . . . . . . . . . . . . . . . 1 year minimum D.O.T.Shipping Label . . . . . . . . . . . . . ORM-D PACKAGING 20 fl. oz. aerosol can PROD. #0276 Click here to return to top of page BATTERY COAT™Battery Terminal Protector and SealerDESCRIPTIONZep Battery Coat is an aerosol. blend of organic resin polymers dissolved in fast-evaporating solvents. FEATURES: BENEFITS • Prolongs battery life: Seals out acid fumes, moisture, dirt, grease, and oil. • Forms a tough, durable coating: Protects against corrosion. • Fast-drying: Evaporates quickly and leaves no residue. • Long-lasting: Remains flexible at low temperatures. Will not crack, chip or peel. • Tinted red: Helps identify coverage. • Economical: Saves time and labor. • No ODC’s: Contains no 1,1,1 Trichloroethane or CFC’s. APPLICATIONS Use on any battery-operated and/or powered equipment, including automobiles, boats, motorcycles, tractors, road grading equipment, bulldozers, fork lifts, and golf carts. SPECIFICATIONS Physical Form . . . . . . . . . . . . . . . .Aerosol Storage Temperature .........................60° to 120°F/16° to 49°C Net Weight . . . . . . . . . . . . . . . . . 15 oz. avdp (425 g) Shelf Life ..................................1 yar minimum Propellant type . . . . . . . . . . . . . . .Hydrocarbon DOT Shipping Label...........................None Flammability . . . . . . . . . . . . . . . . Flammable PACKAGING 20 oz. fl. oz aerosol can PROD. #0108 Click here to return to top of page ZEPRESTOA Two-Phase carburetor, transmission and small parts Stripper.DESCRIPTIONA powerful, two layered, vat-type solvent cleaner, degreaser, and stripper. Upper sealer layer is an aqueous blend of corrosion inhibitors, acid neutralizers, and evaporation inhibitors. Lower solvent layer contains powerful chlorinated hydrocarbon solvents, activators, and emulsifiers. Contains no carbon tetrachloride, chloroform, or trichloroethylene. FEATURES: BENEFITS • Cuts burnt-on carbon: Removes burnt-on carbon, paints, gums, burnt-on oil, tar, etc. • Non-flammable: Has no flash point and is totally non-combustible. • Water rinsable: Flushes off completely with water. No solvent rinse required. • Long lasting: Retarded evaporation extends Zepresto lifetime beyond other products of this type. • Use on most metals: Will not damage babbit metals, zinc, aluminum & magnesium alloys, copper, brass, etc. in the time required to clean. (Note: May discolour aluminum and soft metals.) APPLICATIONS AND DILUTIONS Use to clean, degrease, and strip carburetors, fuel injectors, brake parts, heads, fuel pumps, pistons. Strips paint and decals. Used in soak vats or in tanks equipped with mechanical agitators. Do not heat or use with air agitation. CAUTION: Contains powerful chemicals! Zepresto should not be heated or used in air agitation systems. Adequate ventilation during use is recommended. Safety Equipment: Butyl rubber gloves, boots, apron, face shield, splash-proof safety goggles. SPECIFICATIONS Physical Form....................Two-Phase Liquid Colour...............................Upper Phase-light yellow ........................................Lower Phase-dark amber brown Shelf Life..........................1 year minimum Flash Point........................None WHMIS…………………….……. Class E, D1A TDG..……………………………. Class 8, 6.1, 9.2 Packaging: 5 gal pail with basket PROD #036236 Click here to return to top of page DIESEL FUEL ADDITIVE™Concentrated Diesel Fuel and Fuel Oil Additive for Low Sulfur FuelsDESCRIPTIONZep Diesel Fuel Additive is a concentrated fuel stabilizer including excellent flow and cetane improvers. FEATURES: BENEFITS • Modifies wax crystals: Prevents low temperature flow & filter plugging problems • Improves Diesel Ignition: Raises the fuel cetane rating for in easier starts and better operation • Anti-Oxidant: Retards fuel deterioration that can occur during long term storage • Gum Dispersant: Prevents deposits of gums in the fuel system, particularly injectors • Corrosion Inhibitor: Protects fuel engine fuel system components from corrosion damage • Lubricity Additives: Two lubricity additives prevent fuel system wear TECHNICAL SPECIFICATIONS The following specifications are based on typical performance results obtained upon addition to No. 2 Diesel Fuel at a 1:1000 ratio, but cannot be guaranteed due to fluctuations in fuel quality. Cetane Number . . . . . . . . . . . . . . . .5point increase Pour Point . . . . . . . . . . . . . . . . . . . .15°F decrease Cold Filter Plug Point . . . . . . . . . . .5°F decrease SPECIFICATIONS Physical Form . . . . . . . . . . . . . . . . .thin, solvent-based liquid Flash Point . . . . . . . . . . . . . . . . .... 117°F Color . . . . . . . . . . . . . . . . . . . . . . .clear, colorless Odor . . . . . . . . . . . . . . . . . . . . . . .hydrocabon Shelf Life. . . . . . . . . . . . . . . . . . . ..1 year minimum Specific Gravity . . . . . . . . . . . . . . . .0.81 D.O.T.Shipping . . . . . . . . . . . . . . ..None PACKAGING Quarts, 6-gallon pail, 55-gallon drum PROD. #0583 Click here to return to top of page |
|
Home |
Company Info |
Technical Info |
View Shopping Cart |
Our 5 Star Guarantee |
Updated 5/10/13 |